Part Number Hot Search : 
FM830 NTE52 ODUCT SFS2A 02600 MAX1951 D4050BC 277M00
Product Description
Full Text Search
 

To Download TFS190M Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TFS190M.doc
version 1.1
21.03.2003
VI TELEFILTER
Filter specification
TFS 190 M
1/5
Measurement Condition
Ambient temperature: Input power level: Terminating impedances at fc *: 23 0 input: output: C dBm 477 // -13,4 pF 426 // -14,5 pF
Characteristics
Remark:
The reference level for the relative attenuation a rel of TFS190M is the minimum of the pass band attenuation amin. This value is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 5 dB filter attenuation level relative to the insertion loss a e. The given values for the relative attenuation a rel and the group delay ripple have to be reached at the frequencies given below, even if the centre frequency f c is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
Insertion loss (Reference level) Nominal frequency Centre frequency Pass band Relative attenuation fN ... fN fN 0,3 MHz ... fN ae = amin
typ. Value
6,5 dB max.
Limit
12 dB
fN fc PB arel 0,3 MHz 0,55 MHz
190,005 MHz fN
190 -
MHz
0,3 MHz
0,5 dB 1,7 dB 19 48 34 dB dB dB
max. max. min. min. min.
1,2 dB 5 dB 10 40 30 dB dB dB
fN 0,75 MHz ... fN 0,9 MHz @ fN 0,9 MHz fN 0,9 MHz ... fN 10 MHz Group delay ripple within within
fN fN
0,45 MHz 0,65 MHz
0,45 s 1,45 s TCf** - 0,034 ppm/K + 16 C
max. max.
1 2
s s
Operating temperature range Storage temperature range Temperature coefficient of frequency Frequency inversion temperature T0
- 40 C ... + 65 C - 40 C ... + 80 C -
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as **)
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz)
generated:
checked / approved:
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS190M.doc
version 1.1
21.03.2003
VI TELEFILTER
Filter specification
TFS 190 M
2/5
Construction and pin connection
Pinning 1 2 3 4 5 6 7 8 9 10 Ground Input RF return Input Ground Ground Ground Output RF return Output Ground Ground
S 190M R12
date code
date code
year + month 2001 2002 2003
1 10 9 8
2
3 4 5
N P R ...
7
6
50
test circuit (unbalanced)
L1 Input 50 Ohm
3
8
L3 Output 50 Ohm
SAW
L2 L4
1,2,4,5,6,7,9,10
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS190M.doc
version 1.1
21.03.2003
VI TELEFILTER
Filter specification
TFS 190 M
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Change of temperature: 4. Resistance to solder heat (reflow): 4; 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 14 Test N reflow possible: twice max.; for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page
Packing
Tape & Reel: DIN IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer 2000 min 300 mm min 500 mm min 300 mm
Tape (all dimensions in mm) W : 16 0,3 Po : 4 0,1 Do : 1,5 + 0,1 D1 : 1,5 + 0,1 E : 1,75 0,1 F : 7,5 0,1 G (min) : 0,6 P2 : 2 0,1 P1 : 12 0,1 D1(min) : 1,5 Ao : 7,6 0,1 Bo : 9,6 0,1
Po
EMBOSSED CARRIER TAPE
Do
P2
E Ao F W
D1 13,4
0,1
Bo
G
P1
COVER TAPE
W2
Reel (a ll dim e ns io ns in m m ): A : 3 30 16,4 +2 22 ,4 60 : 12,8 0 ,1
C A N
W1 : W 2 ( ma x) : N ( min) C :
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right. TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS190M.doc
version 1.1
21.03.2003
VI TELEFILTER
Filter specification
TFS 190 M
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS190M.doc
version 1.1
21.03.2003
VI TELEFILTER
Filter specification
TFS 190 M
5/5
History
Version 1.0 1.1 Reason of Changes generate specification according to customer requirements typical values, terminating impedances and matching configuration added Name Pfeiffer Pfeiffer Date 21.10.2002 21.03.2003
TELEFILTER GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.


▲Up To Search▲   

 
Price & Availability of TFS190M

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X